Solex 36mm Throttle

Single Throttle Body for fitment to stock 34pict-3 manifold. Direct mount 2 bolt fitment
36mm bore at the butterfly tapering up to 48mm at the inlet
Stainless steel shaft with sealed roller bearings
Stainless steel levers with standard barrel nut cable attachment
Stainless steel fuel rail with -6 male threads
Choice of intake tube either tall with lip for 2 inch silicon boost hose or short pipe for use with
original air filter late model beetle 1303 type
For fitment with injector next to fan shroud a short Siemens or Pico injector must be used.
Throttle can be custom built to reverse the position and allow longer injector fitted to the rear car

We have 3 sizes of short Pico style injector available (approximate values) fuel pressure 3 bar

 80lb/hr- 140hp
 60lb/hr 100hp
 48lb/hr 80hp

Throttle Position sensor can be fitted with connector up or down but needs to be up to clear alternator, may fit in the down postion when using a dynamo

The original manifold has a bore of slightly over 34mm so will need porting slightly to match the 36mm bore of the the throttle.
The original VW manifold and end peices will support over 100hp and equal power and torque to multithrottle or dual carbs upto 4500rpm . Dyno tests carried out on the VW Speed Shop digital dyno with a 1904cc(74x90.5) engine with C35 camshaft, CB 044 heads

Universal throttles with 4 bolt mounting and larger bore are available
here Universal Throttle